material insights
mi-Testing
Services
On-site Testing Services

On-Site Testing Services (Including Equipment Rental)

If you have an in-house or on-site material/component testing installation that requires our expertise in one or more of these areas, then we are happy to support.

  • Integrate one or more of our "mi-Sensor" systems in conventional or high speed configurations to your setup to perform deformation/strain measurements.
  • Lease one or more of our "mi-Sensor" systems in conventional or high speed DIC configurations (for existing mi-Sensor & mi-Tracker customers, for qualified customers following an on-site project).
  • Technical oversight and support of "material testing with DIC" including training & recommendations for optimized practices [for mi-Sensor & mi-Tracker customers].
  • Evaluation of existing material testing setups/installations and recommendations for hardware/software improvements and expansions.

CTC Setup Adapted to a Customer's Universal Load Frame

CTC Testing Setup_1_FADI-AMTCTC Testing Setup_1_FADI-AMT
Cyclic Tension Compression_CTC_ Custom setupCyclic Tension Compression_CTC_ Custom setup

Some of Our On-Site Projects

Motion Analysis of a Progressive Servo Press at a Tier 1 Supplier:

High-Speed-Testing-Setup_Component-Testing_Onsite_1_FADI-AMT_3_FADI-AMTHigh-Speed-Testing-Setup_Component-Testing_Onsite_1_FADI-AMT_3_FADI-AMT
High-Speed-Testing-Setup_Component-Testing_Onsite_PhotronCamera_2_FADI-AMT_FADI-AMTHigh-Speed-Testing-Setup_Component-Testing_Onsite_PhotronCamera_2_FADI-AMT_FADI-AMT
High-Speed-Testing-Setup_PhotronCamera_3_FADI-AMT-FADI-AMTHigh-Speed-Testing-Setup_PhotronCamera_3_FADI-AMT-FADI-AMT
Target tracking during test for a press using 3D-DIC_FADI-AMTTarget tracking during test for a press using 3D-DIC_FADI-AMT
Motion Analysis for a press using 3D-DIC_FADI-AMTMotion Analysis for a press using 3D-DIC_FADI-AMT

Photogrammetry Measurements of a Propeller shaft [Onsite measurements at a Ship Yard]

New Propeller to be placed after checking the shaft measurements using Photogrammetry-Dubai Dry Docks-FADI-IMSNew Propeller to be placed after checking the shaft measurements using Photogrammetry-Dubai Dry Docks-FADI-IMS
Measurement of the shaft using Photogrammetry-Dubai Dry Docks-FADI-IMSMeasurement of the shaft using Photogrammetry-Dubai Dry Docks-FADI-IMS
Dimensions check for the extracted results using photogrammetry-Dubai Dry Docks-FADI-IMSDimensions check for the extracted results using photogrammetry-Dubai Dry Docks-FADI-IMS

mi-Sensor High Speed 3D Fitted to a Customer's High Speed Machine

High Speed Testing Setup_1_material insights High Speed Testing Setup_1_material insights
High Speed Testing Setup_2_material insights High Speed Testing Setup_2_material insights